NAREX MTE - first page
...Expert in Boring


Search site NAREX MTE through Google.

| Home | Czech |












Czech Republic





Office work





Fuh - Milling angle head NAREX
205bh - Fine boring head
205bh - Fine boring head - NAREX

Favourable actions here ...



Product description Fuh - Milling angle head


Fuh PVI - legend

Fuh FXI - legen


Fuh - legend

1 - body, 2 - spindle headstock, 3 - spindle, 4 - arresting arm, 5 - arresting pin, 6 - pin,
7 - scale α, 8 - scale ß, 9 - screw, 10 - screw, 11 - spring collet, 12 - taper shank


Fuh – Milling angle head = power-actuated holder of cutting tools with shank. Using – on NC and CNC boring and milling machines. Tool chucking in spring collets type ER DIN 6499. Models PVI and FXI with fixed taper shank, the taper shank and the driving shaft are one piece. Models PVM and FXM – with exchangeable taper shank. Models PVI and PVM – the slope angle of the head spindle may be set within the range 0÷90°. Models FXI and FXM – the slope angle of the head spindle is 90°. DAF A – the arresting arm put together head and machine headstock, holds the head in the preset position and retains the cutting forces. The arresting pin is put in the retaining block mounted on the headstock in distance „ A“ from the spindle axis. The retaining block is included in the accessories of the head.

Advantages of using FUH

  • Milling angle head increases the scope of using of the machine, makes possible to machine the surfaces which are for the used machine unaccessible.

  • Concentration of machining operations increases the accuracy of the executed machining by one clamping of the workpiece, reduces the costs caused by repeated clamping, reduces the production times – increases the working productivity.

Notice !

  • Milling angle head is designed for finishing operation of milling or boring. It isn't suitable for roughing operation of milling.




Fuh - Milling angle head NAREX

  Fuh - Milling angle head NAREX  

Fuh - Milling angle head NAREX

  Fuh-tool clamping   Fuh - PVI   Fuh PVI, FXI
  Fuh - Milling angle head NAREX        
  FXI - exchangeable bushings        





General Dealers Czech Republic


  • M & V, spol. s r.o. (Vsetín)

4. května 288, CZ-755 01 Vsetín

tel:  420-571 484 817

fax: 420-571 413 126

  • TTI, s.r.o. (Brno)

Údolní 40, CZ-602 00 Brno

tel: 420-543 216 868

fax: 420-543 249 300

  • Stim Tools, a.s. (Brno)

Bratislavská 49, CZ-602 00 Brno

tel: 420-545 212 092

fax: 420-545 211 163

  • HOFMEISTER s.r.o. (Plzeň)

Mezi ploty 12, CZ-326 00 Plzeň

tel: 420-377 242 058

fax: 420-377 243 161

  • BOS HK a.s. (Teplice)

Přítkovská 152, CZ-417 12 Teplice-Proboštov

tel:  420-417 560 721

fax: 420-417 560 385

  • HANÁK NÁŘADÍ, s.r.o.

Osvobození 129, CZ-763 16 Fryšták

tel: 420-577 110 711

fax: 420-577 110 733


  • NTV - Naradie, s.r.o.

Farská 86/2

SK-019 01 Ilava

phone: 421-424 466 316

fax: 421-424 464 279

  • M&V, Slovakia spol. s r.o.

Vsetínská cesta 1487-9

SK-020 01 Púchov

phone: 421-424 634 548

fax: 421-424 634 549


Sumracná 27

SK- 821 02 Bratislava

phone: 421-243 338 080

fax: 421-243 335 501


Horská 1311/2

SK-958 06 Partizanské

phone: 421-387 491 373

fax: 421-387 491 373


Frequently asked questions (FAQ)

  • Is it possible to use milling angel head on any kind of machine tool?

Heads are designed for boring and milling machines with taper shanks SK40 and SK50. If spindle is tipped up in other angel than 0° or 90° than adjustable heads PVI or PVM need NC, CNC machine with continuous control.

  • What are conditions for putting the milling angle head on machine tools?

Necessary is to choose suitable machine and beside spindle install retaining block which holds case of head. Block is a part of head accessories. Distance from machine spindle centerline is given by modification of arresting arm. (spot height A)

  • Is it more suitable to use fixed or adjustable head?

Adjustable heads PVI or PVM are more universal but in compared to fixed they have lower rigidity and thereby higher propensity to vibration. Their servicing is more difficult. If you do not assume full utilization, we recommend you to choose fixed head FXI or FXM.

  • Is it advantage to have head with fixed taper shank - types PVI, FXI or with exchangeable taper shank - types PVM and FXM?

For wider usage of head in workroom is exchangeable taper shank benefit. In light of rigidity and propensity to vibration we can arrange heads in this order: FXI - FXM - PVI - PVM where from the left side to the right side rigidity falls and simultaneously limitative element of cutting conditions grows.

  • In catalogue is noted extended modification of head PVM or FXM. Is it commonly applicable?

It is only one possible solution which assumes enduring clamping head to the machine headstock by flanges. Arresting arm is unusable in this case.

  • What is necessary to consider before purchase of milling angel head?

Usage measure of head, its necessity (head is for filigree not for stocking). Real possibility of head setting on the machine.

  • Is it possible to use inner coolant by these heads?

No it is impossible. Heads are not designed for this type of coolant. If you would need it, firm NAREX MTE is able to offer you special solution which will make inner coolant possible.

  • Can be case arresting solved by other way than with arresting pin?

Yes it can. If it is necessary, producer will cooperate on this solution.

  • What to avoid during using this head?

First of all you must avoid its overloading what has main influence over shortening bearings and bevel gears durability. We recommend the cooling fluid (especially by adjustable heads) not to spray in bigger size on head case. The fluid can get inside the case and destroy bearings.

  • With which accuracy is possible to adjust an spindle slope angel of head PVI or PVM?

According to angular scale in range of ± 0,5°, with process of accurate adjustment - Instruction for use - is possible to align the spindle practically to zero.


Product repairing


NAREX MTE standardly provides repairs of produced and delivered products. There are guarantee repairs or normal non guarantee repairs. During repair is product dismounted, there are found defective parts and up to it is determined range and price of repair. After customer´s repair price confirmation are defected parts exchanged, product is again mounted and tested.

Repair speeding

For repair speeding and lower price is suitable to enclose to repair order letter with information about problems (during which conditions defects occurs or indicate required range of repair).

Repair ordering

For repair ordering you should send product for repair, order of repair and specifications of defects on our address:


sales department

Moskevska 659/63

CZ-101 00 Prague 10
Czech Republic

Information about repair

About repair you will be informed by e-mail or by phone, with any questions you can contact export department on phone: +420 246 002 249, e-mail:, fax: + 420 246 002 335


NAREX MTE s.r.o.

Moskevska 659/63

CZ-101 00 Prague 10
Czech Republic




+420-246 002 321

+420-246 002 249

+420-246 002 335

+420-246 002 343



  Technical support is at the disposal of you on phone +420 246 002 249 or you can contact us by e-mail: or by fax: +420 246 002 335.


Basic technical information you can find also on reference service.


NAREX MTE s.r.o.

Moskevska 659/63

CZ-101 00 Prague 10
Czech Republic




+420-246 002 321

+420-246 002 249

+420-246 002 335

+420-246 002 343


  Catalogue of Milling tools - Download (PDF)
  • Catalogue of Milling tools (PDF)




  Fuh - Catalogue (PDF)
  • Milling angle heads Fuh (PDF)




  ZP-10/X - Spindlespeeders - Catalogue (PDF)
  • Spindlespeeder ZP-10/X (PDF)




Display of products lines (quick reference)
  • Display of products lines (quick reference)

| Contact us | mexin - Spain | Sitemap | © 2016 NAREX MTE® s.r.o. All rights reserved .